Tripp Lite HDMI over Cat6 Extender Kit, Wallplate Transmitter and Receiver, 4K 60Hz, 4:4:4, IR, PoC, HDR, HDCP 2.2, 230 ft., TAA

Tripp Lite HDMI over Cat6 Extender Kit, Wallplate Transmitter and Receiver, 4K 60Hz, 4:4:4, IR, PoC, HDR, HDCP 2.2, 230 ft., TAA - Video/audio/infrared extender - HDMI - over CAT 6 - up to 70 m - TAA Compliant
B127A-1A1-FHFH
237.86 vat incl.
196.58 € vat excl.
Quantity
ADD TO CART
NO STOCK (by order)
Category Repeaters & Transceivers
Manufacturer TRIPP-LITE
Model HDMI over Cat6 Extender Kit, Wallplate Transmitter and Receiver, 4K 60Hz, 4:4:4, IR, PoC, HDR, HDCP 2.2, 230 ft., TAA
Productline Tripp Lite
Part number B127A-1A1-FHFH
This complete wall-plate-style transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Both the transmitter and receiver have a single-gang metal wall plate design with a metal back cover and blend perfectly into the room decor.¦The B127A-1A1-FHFH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet.¦The B127A-1A1-FHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.¦To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.¦After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.¦The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).¦The B127A-1A1-FHFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. This complete wall-plate-style transmitter and dual-output receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and displays are farther apart than conventional A/V cables allow. Both the transmitter and receiver have a single-gang metal wall plate design with a metal back cover and blend perfectly into the room décor.¦Say you have a brand new 4K (at 60 Hz) HDTV in the living room, but want to also connect your Blu-ray player or satellite box to the older 1080p TV in the bedroom. The B127A-2A1-FHFH is backward compatible with 4K (at 30 Hz) and 1080p (at 60 Hz) resolutions. This allows each connected television to display video at its maximum resolution.¦To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.¦The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the displays with user-supplied HDMI cables. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).
Main Specifications
Product DescriptionTripp Lite HDMI over Cat6 Extender Kit, Wallplate Transmitter and Receiver, 4K 60Hz, 4:4:4, IR, PoC, HDR, HDCP 2.2, 230 ft., TAA - video/audio/infrared extender - HDMI - TAA Compliant
Form FactorIn-wall mountable
Manufacturer Warranty1-year warranty
Dimensions (WxDxH)7 cm x 3.4 cm x 11.5 cm
Weight453.6 g
PowerAC 100/230 V
LocalisationAustralia, North America, United Kingdom, Europe
Device TypeVideo/audio/infrared extender
Data Link ProtocolHDMI
Max Transfer Distance70 m
Power Over Ethernet (PoE)PoC
TAA CompliantYes
Transmission MediumCAT 6
Prices and informations are subject to modifications
*The stock and delivery time may change at any time, at the up or down.

SUPPORT

- Payment methods
- Delivery methods
- Inscription
- Manufacturers
- How we are?
- Track and trace order
- Faq
- Terms
- Your customer code
- Contact

PAYMENT METHODS

- Bancontact
- Bank transfer
- Bill
- Visa
- Mastercard
- Maestro
- Res

Bancontact Virement bancaire RES+ Visa Mastercard Maestro

OUR DIVISIONS

- Optinet
- Opticall
- Optitech
- Optisave
- Optishop

CONTACT

Optigroup sprl
Avenue Henri Conscience, 94
1140 Bruxelles - Belgique
Phone : +32.(0)2 726 21 32
Fax : +32.(0)2 726 21 40

VAT : BE0456.984.816
R.C.B.600.916

facebook
Left blue shape background
Right blue shape background
Bottom blue shape background