Main Specifications | Product Description | D-Link DGS 1210-10P/ME - switch - 10 ports - Managed - rack-mountable |
| Manufacturer Warranty | Limited lifetime warranty |
| Features | Flow control, Layer 2 switching, auto-negotiation, BOOTP support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DoS attack prevention, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, SNTP support, surge protection, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), IPv4 support, fanless, LLDP support, IP-MAC binding, SNMP trap, DHCP client, TFTP client, SNMP support, Ethernet Ring Protection Switching (ERPS), Authentication, Authorization and Accounting (AAA), LLDP-MED, loopback detection, Dying Gasp, Q-in-Q tunnelling, VLAN trunking, MIB support |
| Dimensions (WxDxH) | 28 cm x 18 cm x 4.4 cm |
| Weight | 1.92 kg |
| Power | AC 100-240 V (50/60 Hz) |
| Localisation | Europe |
| Device Type | Switch - 10 ports - Managed |
| Enclosure Type | Rack-mountable 1U |
| Compliant Standards | IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3az |
| Capacity | Packet buffer size: 1.5 MB ¦ Link aggregation groups: 8 ¦ VLAN groups: 4094 ¦ ACL rules: 256 ¦ MLD groups: 256 ¦ Dynamic VLAN entries: 256 |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI |
| Routing Protocol | IGMPv2, IGMP, MLDv2, MLD |
| Performance | Switching capacity: 20 Gbps ¦ Forwarding rate (64-byte packets): 14.88 Mpps |
| Power Over Ethernet (PoE) | PoE |
| MAC Address Table Size | 16K entries |
| Ports | 8 x 10/100/1000 (PoE) + 2 x Gigabit SFP |
| PoE Budget | 78 W |
| Subtype | Gigabit Ethernet |
|
