Main Specifications Product Description | HPE Aruba 6200M 48G Class4 PoE 4SFP+ Switch - switch - Max. Stacking Distance 10 kms - 48 ports - Managed - rack-mountable |
Manufacturer Warranty | Limited lifetime warranty |
Features | Layer 2 switching, ARP support, DiffServ support, Virtual Route Redundancy Protocol (VRRP) support, Quality of Service (QoS), Trusted Platform Module (TPM), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), Deficit Weighted Round Robin (DWRR), Management Information Base (MIB), Class of Service (CoS), Type of Service (ToS), Bridge protocol data unit (BPDU), Source-Specific Multicast (SSM), Network Timing Protocol (NTP), security slot (Kensington security lock compatible), Rapid PVST+ (RPVST+), DNS support, IGMP support, Unidirectional Link Detection (UDLD), Automatic Media-Dependent Interface Crossover (MDIX), web GUI management portal, Unsupported Transceiver Mode (UTM), Egress Queue Shaping (EQS) |
Dimensions (WxDxH) | 44.2 cm x 38.5 cm x 4.4 cm |
Weight | 6.15 kg |
Power | AC 100-120/200-240 V (50/60 Hz) |
System Requirements | AOS-CX |
Device Type | Switch - 48 ports - L3 - Managed - stackable |
Enclosure Type | Front and side to back rack-mountable 1U |
Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at |
Capacity | Switched virtual interfaces (SVIs): 128 ¦ IPv4 host table capacity: 8000 ¦ IPv6 host table capacity: 8000 ¦ IPv4 routes (Unicast): 2000 ¦ IPv6 routes (Unicast): 2000 ¦ IGMP groups: 1000 ¦ MLD groups: 1000 ¦ IPv4 ACL entries (ingress): 1000 ¦ IPv6 ACL entries (ingress): 1000 ¦ MAC ACL entries (ingress): 1000 ¦ IPv4 ACL entries (egress): 512 ¦ IPv6 ACL entries (egress): 256 ¦ MAC ACL entries (egress): 512 |
Remote Management Protocol | SNMP, SNMP 3, SNMP 2c, CLI |
Routing Protocol | OSPF, RIP-2, OSPFv2, OSPFv3, ECMP |
Pricing Type | BTO |
Performance | Switching capacity: 176 Gbps ¦ Throughput: 130.9 Mpps ¦ Latency (1 Gbps): 2.28 µs ¦ Latency (10 Gbps): 1.46 µs ¦ Packet buffer size: 8 MB ¦ Stacking bandwidth: 40 Gbps |
Power Over Ethernet (PoE) | PoE+ |
MAC Address Table Size | 16000 entries |
Ports | 48 x 10/100/1000 (PoE+) + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking) |
Jumbo Frame Support | 9220 bytes |
PoE Budget | 1440 W |
Subtype | Gigabit Ethernet |
|